product

High reputation Acidic Reduction Clearing Agent - Levelling agent for acid and pre-metallized dyes – Honneur

Short Description:


Product Detail

FAQ

Product Tags

Related Video

Feedback (2)

With our excellent administration, potent technical capability and strict top quality control technique, we go on to provide our consumers with trusted quality, reasonable price ranges and fantastic providers. We intention at becoming one among your most trusted partners and earning your fulfillment for End-Blocked Hydrogen Silicone, End-Blocked Hydrogen silicone fluid, New Downy Fabric Softener, We hope to establish additional organization interactions with prospects all over the entire world.
High reputation Acidic Reduction Clearing Agent - Levelling agent for acid and pre-metallized dyes – Honneur Detail:

Levelling agent for acid and pre-metallized dyes
Use: Levelling agent for acid and pre-metallized dyes.
Appearance: Amber clear liquid.
Ionicity: Anion / non-ionic
PH Value: 7~8 (10 g/l solution)
Appearance of aqueous solution: Clear
Hard water stability: Excellent, even at 20° dH hard water.
pH stability: PH 3-11 stable
Electrolyte stability: Sodium sulfate or sodium chloride up to 15g/l.
Compatibility: Compatible with anionic dyes and auxiliaries, and incompatible with cationic dyes.
Storage stability: Store at room temperature for 12months. It may crystallize at temperatures
below 5℃, but does not affect product performance

Characteristic
LEVELING AGENT 01 is an anionic / non-ionic levelling agent, it had affinity with both
cashmere and wool fiber (PAM) and dyes. therefore, it has good retarding dyeing, excellent
penetration and even dyeing properties. It has a good adjusting effect on synchronizing dyeing and
exhaustion regulation for trichromatic combination dyeing and Easily-unevenly dyed fabrics
LEVELING AGENT 01 AGENT 01 has a good effect on the improvement of uneven color or too
deep dyeing and has good discharge performance.

Dosage:
 Dyeing
The dosage of LEVELING AGENT 01 should be strictly according to the dosage of dyes,
usually 0.5%-2.5%. For fabrics with poor dyeing uniformity, the dosage can be increased.
LEVELING AGENT 01 should have been added to the dye bath to adjust the pH before adding
the dyes and salts
for polyamide fiber dyeing which is easily unevenly dyed, pls add LEVELING AGENT 01 and
gradually heat it to 95-98°c or even 110-115°c before adding dyes. The cycle preheating treatment
is 10-20min, then add cold water to cool it to 40-50 ° c, then add dyes, adjust pH, and start dyeing.
 Color Repairing
Use 1%-3% LEVELING AGENT 01 and heat it to boil in an ammonia bath (2-4%), which can
repair uneven dyeing or too deep dyeing.


Product detail pictures:

High reputation Acidic Reduction Clearing Agent - Levelling agent for acid and pre-metallized dyes – Honneur detail pictures


Related Product Guide:

Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction for High reputation Acidic Reduction Clearing Agent - Levelling agent for acid and pre-metallized dyes – Honneur , The product will supply to all over the world, such as: Indonesia, Croatia, Malta, Many products fully conform to the most rigorous of international guidelines and with our first-rate delivery service you will have them delivered at any time and in any place. And because Kayo deals in the entire spectrum of protective equipment, our customers don't need to waste time shopping around.
  • It is not easy to find such a professional and responsible provider in today's time. Hope that we can maintain long-term cooperation.
    5 Stars By Louis from Bolivia - 2017.08.15 12:36
    The company leader recept us warmly, through a meticulous and thorough discussion, we signed a purchase order. Hope to cooperate smoothly
    5 Stars By Liz from Southampton - 2017.03.08 14:45
    Write your message here and send it to us