product

High Quality Nonionic Antistatic Powder - Sodium Chlorite Bleaching Stabilizer – Honneur

Short Description:


Product Detail

FAQ

Product Tags

Related Video

Feedback (2)

We not only will try our greatest to present fantastic expert services to each purchaser, but also are ready to receive any suggestion offered by our prospects for Cst Viscosity, Oil Silicone, D4 D5 D6 Siloxanes Free, Accurate process devices, Advanced Injection Molding Equipment, Equipment assembly line, labs and software advancement are our distinguishing feature.
High Quality Nonionic Antistatic Powder - Sodium Chlorite Bleaching Stabilizer – Honneur Detail:

Sodium Chlorite Bleaching Stabilizer

Use:Stabilizer for bleaching with sodium chlorite.
Appearance: Colorless and transparent liquid.
Ionicity: Nonionic
pH Value: 6
Water solubility: Completely soluble
Hard water stability: Very stable at 20°DH
Stability to pH: Stable between pH 2-14
Compatibility: Good compatibility with any ionic products, such as wetting agents and fluorescent brighteners
Foaming property: No foam
Storage stability
Store at normal room temperature for 4 months, Place near 0℃ for a long time will cause partial crystallization, resulting in difficulties in sampling.

Properties
The functions of Stabilizer for bleaching with sodium chlorite Can be summarized as follows:
 This product controls the bleaching action of chlorine so that chlorine dioxide produced during bleaching is fully applied to the bleaching process and prevents any possible diffusion of toxic and corrosive odorous gases (ClO2);Therefore, the use of Stabilizer for bleaching with sodium chlorite can reduce the dosage of sodium chlorite;
 Prevents corrosion of stainless-steel equipment even at very low pH.
To keep the acidic pH stable in the bleaching bath.
Activate bleaching solution to avoid the generation of side reaction products.

Solution preparation
Even with automatic feeder being used, Stabilizer 01 is easy to make feeding operation.
Stabilizer 01 is diluted with water in any ratio.

Dosage
Stabilizer 01 is firstly added and subsequently adds the required dosage of acid to working bath.
The usual dosage is as follows:
 For one part of 22% sodium chlorite.
 Use 0.3-0.4 parts of Stabilizer 01.
 The specific use of concentration, temperature and pH should be adjusted according to the changes of fiber and bath ratio.
 During bleaching, when additional sodium chlorite and acid are needed, Stabilizer 01 is not necessary to be appended accordingly


Product detail pictures:

High Quality Nonionic Antistatic Powder - Sodium Chlorite Bleaching Stabilizer – Honneur detail pictures


Related Product Guide:

Being supported by an state-of-the-art and skilled IT team, we could supply technical support on pre-sales & after-sales service for High Quality Nonionic Antistatic Powder - Sodium Chlorite Bleaching Stabilizer – Honneur , The product will supply to all over the world, such as: Indonesia, Hungary, Germany, we rely on own advantages to build a mutual-benefit commerce mechanism with our cooperative partners. As a result, we have gained a global sales network reaching the Middle East, Turkey, Malaysia and Vietnamese.
  • The enterprise has a strong capital and competitive power, product is sufficient, reliable, so we have no worries on cooperating with them.
    5 Stars By Gill from Romania - 2018.09.29 17:23
    Good quality and fast delivery, it's very nice. Some products have a little bit problem, but the supplier replaced timely, overall, we are satisfied.
    5 Stars By Louis from Uganda - 2018.10.01 14:14
    Write your message here and send it to us